Part marking – highly efficient techniques and methods
Applications:
defined surfaces
Required coolant pressure:
10 – 50 bar
Distance compensation:
up to approx. 0,5 mm
Applications:
significant irregularities or dimensional deviations, such as rough castings, etc.
Required coolant pressure:
5 – 50 bar
Distance compensation:
up to ca. 3 mm
Applications:
defines a specified (tolerated) marking depth (e.g. safety-critical components in turbine construction, etc.)
Required coolant pressure:
5 – 120 bar
Distance compensation:
up to approx. 3 mm
Applications:
deeper markings with greater irregularities or dimensional variations, such as rough castings, etc.
Required coolant pressure:
5 – 80 bar
Distance compensation:
up to approx. 3 mm
Applications:
defined surfaces
Required air pressure:
3 – 8 bar
Distance compensation:
up to approx. 1 mm
Applications:
deeper marks with regular, uneven or rough surfaces
Required air pressure:
2 – 8 bar
Distance compensation:
up to approx. 3 mm
Applications:
deeper markings with a predefined (tolerated) marking depth (e.g. safety- critical components in turbine construction, etc.)
Required air pressure:
3 – 8 bar
Distance compensation:
up to approx. 1 mm
Applications:
Deep markings with high quality requirements and a predefined (tolerated) marking depth (e.g. safety- critical components in turbine construction, etc.)
Required air pressure:
2 – 8 bar
Distance compensation:
up to approx. 3 mm
Applications:
rather fine markings with a regular or uneven surface
Length / Diameter
152 mm / ⌀40 mm
Automatic distance compensation:
up to approx. 6 mm
Applications:
Compact, short design for relatively fine markings on surfaces that are either smooth or have an uneven surface
Length / Diameter
102 mm / ⌀20 mm
Automatic distance compensation:
up to approx. 5 mm
Applications:
Very compact design (Weldon ⌀12 mm) for relatively fine markings with a smooth or uneven surface
Length / Diameter
53 mm / ⌀12 mm
Automatic distance compensation:
up to approx. 3 mm
Specification:
Marking depth can be individually preset via the adjustment sleeve (with a scale for precise, repeatable pre-tension adjustment)
Length / Diameter
145 mm / ⌀40 mm
Automatic distance compensation:
up to approx. 5 mm
Specification:
Reinforced steel plate in the clamping area (to prevent clamping deformation). Standard preload pressure of the marking needle (98 N)
Length / Diameter:
76 mm / ⌀20 mm
Automatic distance compensation:
up to approx. 4 mm
Specification:
Reinforced steel plate in the clamping area (to prevent deformation under clamping force). Light preload on the marking needle (45 N)
Length / Diameter:
76 mm / ⌀20 mm
Automatic distance compensation:
up to approx. 4 mm
Specification:
Very compact design with a stainless steel housing and a hardened ⌀12 mm Weldon shank.
Length / Diameter
64 mm / ⌀14 mm
Automatic distance compensation:
up to approx. 6 mm
Applications:
Deep markings on flat and uneven surfaces
Length / Diameter
167 mm / ⌀56 mm
Automatic distance compensation:
up to approx. 6 mm
Standard Weldon shank ⌀20 – other shanks such as HSK, Capto, VDI etc. available on request
Standard Weldon shank ⌀20 – other shanks such as HSK, Capto, VDI etc. available on request
We conduct feasibility studies according to customer requirements. No minimum order quantities are required
We conduct feasibility studies according to customer requirements. No minimum order quantities are required
Standard needle extensions of +15, +50 or +100 mm for W & H type needle embossers
Standard needle extensions of +15, +50 or +100 mm for W & H type needle embossers
Hydraulic pressure gauge for the WSRX-20 and pneumatic pressure gauge for the HRY-20 / PP
Mit Gravostar Kontakt aufnehmen